Browse by Degree programme

A

Akpaloo, Angelique Shika (2021) Optimization of 5-Hydroxymethylfurfural Synthesis from Lignocellulosic Carbohydrates: Kinetic Modelling and Process Design. Master's Thesis / Essay, Chemical Engineering.

Alvarenga Cicchelli, Giuliana M. (2021) Rheological Study of Thermo-reversible Polyketone MWCNT Composites as Potential Double-Layered Actuators. Master's Thesis / Essay, Chemical Engineering.

B

Badr, Parniya (2021) Pyrolysis of Pinewood sawdust and Kraft lignin in molten salt media using a ZnCl2-KCl-NaCl mixture. Master's Thesis / Essay, Chemical Engineering.

Benita, Benedicta Bella (2021) ScCO2-Assisted Grafting of Glycidyl Methacrylate to Recycled Polyethene: A Process Optimization Study. Master's Thesis / Essay, Chemical Engineering.

Beuving, Jaromir J.R.J. (2021) Substituted Furan Assisted Radical Melt Grafting of Maleic Anhydride onto Isotactic Polypropylene. Master's Thesis / Essay, Chemical Engineering.

Bollen, Diana (2021) Supercritical CO2 extraction of dioctyl phthalate (DOP) from PVC and a preliminary model setup. Master's Thesis / Essay, Chemical Engineering.

Boonstra, Kay (2021) Techno-economic analysis of two process pathways for glycerol carbonate production. Master's Thesis / Essay, Chemical Engineering.

Bosch, Patrick (2021) Co-agent assisted solid state grafting of maleic anhydride onto isotactic polypropylene. Master's Thesis / Essay, Chemical Engineering.

Bosman, Hendrik Elias (2021) Rheological investigation of the “matt lane” phenomena occurring in the manufacturing of silicone release coatings. Master's Thesis / Essay, Chemical Engineering.

Brouwer, Wouter (2021) The Impact of Reactor Design and Operation on Foaming during the Nitrate Intercalation Reaction of Mg/Al Hydrotalcite. Master's Thesis / Essay, Chemical Engineering.

D

Dieker, Christopher, C (2021) Recycling of inner tubes of bicycles into bike baskets -From tire to crate-. Master's Thesis / Essay, Chemical Engineering.

Dijkstra, Emiel (2021) Recovery of enzymes via micro- and ultrafiltration in order to increase the feasibility of glucose production via enzymatic conversion. Master's Thesis / Essay, Chemical Engineering.

Donk, Frank, van der (2021) Synthesis and characterization of novel biobased polyester-imides from natural amino acids, as precursors of polyester-imide urethane coatings. Master's Thesis / Essay, Chemical Engineering.

E

El Rez, Ibrahim (2021) Principles of Modeling an Extruder for the Recycling of Tire Rubber. Master's Thesis / Essay, Chemical Engineering.

F

Filippi, Francesco (2021) Repurposing of bike inner tubes into bike baskets. Master's Thesis / Essay, Chemical Engineering.

H

Heijkoop, Jesse (2021) Design of New PMMA-Based Host Matrices for Luminescent Solar Concentrators. Master's Thesis / Essay, Chemical Engineering.

Hendriksen, Mart (2021) Polypyrrole-Polyurethane based stretchable conductive composites using oxidative chemical vapour deposition. Master's Thesis / Essay, Chemical Engineering.

Hendriksen, Mart (2021) Polypyrrole-Polyurethane based stretchable conductive composites using oxidative chemical vapour deposition. Master's Thesis / Essay, Chemical Engineering.

Horvat, Diana-Patricia (2021) Electroactive self-healing soft robotic gripper. Master's Thesis / Essay, Chemical Engineering.

J

Jardan, Daniela (2021) Middle distillates from furfural and acetone: Performance of Mg-Al mixed oxides and parameter optimisation. Master's Thesis / Essay, Chemical Engineering.

Jong, M. de (2021) Acetalization of Glycerol with 5-hydroxymethylfurfural using hierarchical solid acid catalysts. Master's Thesis / Essay, Chemical Engineering.

Jonge, Fabian, de (2021) Compatibilization of novel reclaimed Ground Tyre Rubber and High Density Polyethylene blends. Master's Thesis / Essay, Chemical Engineering.

Jonker, Matthijs (2021) Reactions of toluene-diisocyanate with butyl poly ethylene glycol performed under continuous flow in a microtubular reactor - experimental study and kinetic modelling. Master's Thesis / Essay, Chemical Engineering.

K

Khan, Muhammed Saad (2021) SYNTHESIS OF HYDROPHOBIC STARCH FOR COATING APPLICATIONS. Master's Thesis / Essay, Chemical Engineering.

Krisman, Bart, B.G.A. (2021) Lignin hydropyrolysis in a eutectic molten salt mixture performed in a semi- continuous autoclave reactor. Master's Thesis / Essay, Chemical Engineering.

Krop, Olaf (2021) The Incorporation of Ground Tire Rubber in Commodity Thermoplastic-based Blends. Master's Thesis / Essay, Chemical Engineering.

L

Leenders, Nienke (2021) Improvement of the compatibility and mechanical properties of recycled HDPE and virgin PP blends with different compatibilization methods. Master's Thesis / Essay, Chemical Engineering.

Lutong, Gou (2021) Homogeneous Catalysis for Preparing Slow-Releasing Fragrances via Acetalization or Ketalization. Master's Thesis / Essay, Chemical Engineering.

M

Manjaji, Dawn (2021) Supercritical CO2 for the Application of biological material preservation. Master's Thesis / Essay, Chemical Engineering.

Maring, Roelf (2021) Oxygen Evolution over Mesh Structured Ni-Based Electrodes. Master's Thesis / Essay, Chemical Engineering.

Merkelijn, Nadalina (2021) Sustainability evaluation model of chemical production pathways for early stage product and process development. Master's Thesis / Essay, Chemical Engineering.

N

Niyazov, Zafarjon (2021) Optimization of the Flue Gas Purification Design at the Lowest Energy Penalty. Master's Thesis / Essay, Chemical Engineering.

O

Oeben, Jordie (2021) Effect of hydrophobicity and side-chain characteristics of monomers in Diels-Alder assisted melt grafting of isotactic polypropylene. Master's Thesis / Essay, Chemical Engineering.

Okkinga, O.W.J. (2021) Iron (ii) oxidation for regeneration of the vitrisol® solution. Master's Thesis / Essay, Chemical Engineering.

Oude Nijeweme, Ilse (2021) A Study on Continuous Hydropyrolysis of Lignin in Molten Salts. Master's Thesis / Essay, Chemical Engineering.

P

Patil, Satej (2021) Process development and economics for enzymatic hydrolysis of tertiary cellulose to glucose. Master's Thesis / Essay, Chemical Engineering.

R

Ramakrishnan, A. (2021) Degradation of polymers – Effect of generic disinfectants and predicting the product life. Master's Thesis / Essay, Chemical Engineering.

Rusu, Igor (2021) Residence time distribution modelling in slug-flow microreactors. Master's Thesis / Essay, Chemical Engineering.

S

Sachelaru, Andreea, A (2021) Synthesis and properties of novel lignin-PLA biocomposites. Master's Thesis / Essay, Chemical Engineering.

Snijders Blok, Kwinten (2021) Development of a canonical equation of state for Liquid-Liquid-Equilibria for the prediction of excess volumes and enthalpy of linear n-alkane mixtures. Master's Thesis / Essay, Chemical Engineering.

Stevelink, Ruben (2021) Homogeneous Co/Mn/Br-catalysed aerobic oxidation of 5-HMF in a continuous flow microreactor. Master's Thesis / Essay, Chemical Engineering.

Stojkov, Gorjan (2021) A Kinetic Study on the Acid-catalyzed Conversion of 3,6-Anhydro-D-galactose to 5-Hydroxymethylfurfural and Levulinic Acid in Aqueous Solutions. Master's Thesis / Essay, Chemical Engineering.

Strien, Julian (2021) Catalytic hydrotreatment of Kraft lignin: oil yield improvements by pretreatment of lignin using ball milling. Master's Thesis / Essay, Chemical Engineering.

T

Takens, Tanja (2021) Mass transfer in capillary microreactors: a study towards the diffusion of ethyl acetate into water. Master's Thesis / Essay, Chemical Engineering.

Tuinstra, Koko (2021) Pilot plant design for electrochemical synthesis of dinitropropanol to produce Bis-(2,2-dinitropropyl)acetal/formal. Master's Thesis / Essay, Chemical Engineering.

V

Voorst, Sven, van (2021) Grafing of X X onto Polypropylene with the aid of X X. Master's Thesis / Essay, Chemical Engineering.

Vries, Ernst, E.P.C.de (2021) Optimization of Semi-Continuous Lignin Extraction, Separation and Subsequent Upgrading. Master's Thesis / Essay, Chemical Engineering.

W

Wansink, Pim (2021) Experimental studies on the liquefaction of lignin in molten salts. Master's Thesis / Essay, Chemical Engineering.

Weiden, Olivier M. T. van der (2021) A new composite material for marine equipmentmade from car tyres and bicycle inner tubes. Master's Thesis / Essay, Chemical Engineering.

Wijk, Bart, de (2021) Synthesis and characterisation of reversible hydrogels by Diels-Alder click reaction. Master's Thesis / Essay, Chemical Engineering.

Wijk, Sylvian van (2021) CO2 fixation strategies to enhance the activity of heterogeneous beads for the conversion of epoxides to cyclic carbonates. Master's Thesis / Essay, Chemical Engineering.