Browse by Degree programme

A

Abeln, Thom (2018) Synthesis and Application of three-dimensional nanoporous graphene carbon nanotubes hybrid structure in Lithium Sulfur batteries. Research Project, Industrial Engineering and Management.

Akkerman, Sanne (2018) Real Time Control Design and Implementation for UHVCVD process at Photonis. Research Project, Industrial Engineering and Management.

Albracht, Michiel (2018) Model Predictive Control in a Power Grid Considering Network Limits. Research Project, Industrial Engineering and Management.

Arunachalam, Joseph Prabhakaran (2018) A comparison study between Willson's and contractive methods to solve power flow equations. Research Project, Industrial Engineering and Management.

B

Belt, Julia van den (2018) Integrated fleet management, exploring how to stimulate the replacement of diesel trucks with environmental friendly alternatives. Research Project, Industrial Engineering and Management.

Bergsma, Sietse (2018) Fundamentals in the adhesion of PVD ZnMg/Zn bi-layered coatings. Research Project, Industrial Engineering and Management.

Bijker, Renate (2018) Vision Based Control Design for Autonomous Cycle Counting. Research Project, Industrial Engineering and Management.

Bijlsma, Astrid (2018) The impact of screening patients according to the expected force of care units on the spread of multidrug-resistant organisms. Research Project, Industrial Engineering and Management.

Blokhuis, Marco (2018) Generic architecture and guidelines to apply it to the design of serious games that model chicken and egg infrastructure development problems. Research Project, Industrial Engineering and Management.

Boer, Matthijs de (2018) A brief survey of catalytic co-pyrolysis of waste plastics and lignocellulosic biomass for BTX production and its potential in the Dutch circular market for plastics. Research Project, Industrial Engineering and Management.

Boer, Roelof Jan (2018) Modeling and simulations of the OceanGrazer’s floater blanket under irregular wave:a Port-Hamiltonian approach. Research Project, Industrial Engineering and Management.

Bovenmars, Tijmen (2018) Influence of shear stress on the efficiency of NanoGlycogen extraction from Galdieria species. Research Project, Industrial Engineering and Management.

Budiarto, Anggreni Junita (2018) Glycogen from Different Galdieria Isolates. Research Project, Industrial Engineering and Management.

C

Catoire, Timo (2018) Relative best response dynamics in public goods games on networks. Research Project, Industrial Engineering and Management.

Cornelissen, Emile (2018) Prediction of wastewater treatment plants process performance parameters based on microbial communities using machine learning techniques. Research Project, Industrial Engineering and Management.

D

Dam, Nick van (2018) Volatile fatty acid recovery from the aqueous waste streams. Research Project, Industrial Engineering and Management.

De Groot, Daan (2018) Functionalization of Polypropylene with Glycidyl Methacrylate via Free Radical Methodologies in the Melt: Expand Polypropylene Applicability. Research Project, Industrial Engineering and Management.

Dekker, Freek (2018) Preliminary optimisation for curing properties of recycled ground tire rubber. Research Project, Industrial Engineering and Management.

Deluster, Rogier (2018) An improvement on the variable MIP neighborhood descent algorithm in the European LNG distribution network. Research Project, Industrial Engineering and Management.

Dongen, Max van (2018) Modelling and Solving Production Routing Problems via Benders Decomposition. Research Project, Industrial Engineering and Management.

den Boer, Remy (2018) Recycling of Ground Tyre Rubber From car tires to rubber products. Research Project, Industrial Engineering and Management.

E

Esmijati, Esmijati (2018) A Privacy-Preserving Method for Cloud-based Control Systems. Research Project, Industrial Engineering and Management.

F

Faber, Jasper (2018) Assessing the eco-efficiency of green gas supply chain scenarios. Research Project, Industrial Engineering and Management.

Fourie, Tori (2018) Creating amphiphilic highly-branched polysaccharides: for bio-based surfactant purposes. Research Project, Industrial Engineering and Management.

G

Geelen, Bart (2018) Ion Extraction by Polyelectrolyte and Ionic Liquid Filled Membranes: A Novel Technology for Wastewater Neutralization. Research Project, Industrial Engineering and Management.

Gelders, M.C. (2018) Improving Efficiency in the Department of Mechanical Testing. Research Project, Industrial Engineering and Management.

Glazener, Maurits (2018) Developing an ‘on-line’ sensor for the detection of toxic components in surface water using genetically modified luminescent Escherichia coli. Research Project, Industrial Engineering and Management.

Gort, Emma (2018) Reduced Modeling of Power Grid Dynamics. Research Project, Industrial Engineering and Management.

H

Herwig, Thijs (2018) A techno-financial analysis of the Ocean Grazer 3 concept. Research Project, Industrial Engineering and Management.

Hofstad Trapnes, Helle (2018) Amylolytic enzymes action on highly branched glucose polymers. Research Project, Industrial Engineering and Management.

Hooghiemster, Herre (2018) Hydrotalcite-based catalysts for biodiesel synthesis in a continuous centrifugal contactor separator. Research Project, Industrial Engineering and Management.

Huijsman, Hessel (2018) Evolutionary stability of hypergraph games on finite networks. Research Project, Industrial Engineering and Management.

Hörst, Michiel (2018) A regional auction-based matchmaking mechanism. Research Project, Industrial Engineering and Management.

I

Ike, Thomas (2018) Vision-Based Distributed FormationControl of Multi-Agent Systems. Research Project, Industrial Engineering and Management.

Immink, Thomas (2018) Block-based maintenance optimization under random machine utilization in the natural gas industry. Research Project, Industrial Engineering and Management.

J

Jiang, Jia Shu (2018) Self-triggered Resilient Consensus Algorithm based on a Broadcasting Protocol. Research Project, Industrial Engineering and Management.

Joustra, Floor (2018) Relocation of Facilities in an Integrated Fleet Management Model. Research Project, Industrial Engineering and Management.

K

Kampen, Ryanne van (2018) Design of a model for integrated planning of routing, matching and parking of train units and the execution of service tasks. Research Project, Industrial Engineering and Management.

Kho, Margot (2018) Analysis of new models of the three-dimensional bin packing problem for the application to the parcel delivery service industry. Research Project, Industrial Engineering and Management.

Klein Kranenbarg, Bram (2018) Condition-based maintenance optimisation of wind power turbines. Research Project, Industrial Engineering and Management.

Kloekke, Lars (2018) Deinking sludge waste management. Research Project, Industrial Engineering and Management.

Koning, Ton (2018) Studying, designing, creating and testing the bladder reservoir of the Ocean Grazer 3.0. Research Project, Industrial Engineering and Management.

Koopman, Bas (2018) Condition-based maintenance effectiveness for compressors in the natural gas industry. Research Project, Industrial Engineering and Management.

Kortenbach, Thijn (2018) Towards bio-based 5-hydroxymethylfurfural by heterogeneous Lewis and Brønsted acid catalysis of glucose in a biphasic system. Research Project, Industrial Engineering and Management.

L

Luppes, Koen (2018) The effect of location agent density controlled by pallet availability on the performance of a Physical Internet inspired system. Research Project, Industrial Engineering and Management.

landini, paolo (2018) A model for synchromodal decisions in inland freight transportation. Research Project, Industrial Engineering and Management.

M

Moraal, Maarten (2018) Incorporate PtG facilities in a power distribution grid for the optimal utilization of excess energy from renewable sources. Research Project, Industrial Engineering and Management.

Muller, Bas (2018) Informatiemanagement bij VPCBO Coevorden. Research Project, Industrial Engineering and Management.

N

Neuteboom, Peter (2018) Properties of silver doped hydroxyapatite to be used as an implant coating. Research Project, Industrial Engineering and Management.

Nienhuis, Robbert (2018) Advanced Modeling and Simulation of Temperature Dependent Friction in Metal Forming Processes. Research Project, Industrial Engineering and Management.

Nijman, Bart (2018) Strategic cost function bidding in wholesale electricity markets. Research Project, Industrial Engineering and Management.

O

Oosterwijk, Brian (2018) Examination of the influence of processing parameters on the adhesion between layers and layer resolution of 3D-printed soda-lime glass. Research Project, Industrial Engineering and Management.

P

Pan, Le (2018) Differential passivity based control of a robotic manipulator. Research Project, Industrial Engineering and Management.

R

Renzelmann, Friederike (2018) The effect of surface roughness and polymer flow on adhesion. Research Project, Industrial Engineering and Management.

Reuvers, Koen (2018) A new policy for reactive scheduling in the process industry. Research Project, Industrial Engineering and Management.

Roscam Abbing, Marnix (2018) Amphiphilic Modified Polyketones as Carriers for 5,10,15,20-Tetrakis-(4-Sulfonatophenyl)porphyrin for the Photocatalytic Oxidation of encapsulated 1,3,5-Triphenylformazan in Poly(sodium 4-styrenesulfonate). Research Project, Industrial Engineering and Management.

S

Samallo, Vincent (2018) Design and implementation of a sense-and-avoid algorithm for unmanned vehicles. Research Project, Industrial Engineering and Management.

Schlooz, Willem (2018) Early detection of lameness through motion sensors. Research Project, Industrial Engineering and Management.

Schnaar, Tijs (2018) Advanced Analytics in Hot Strip Rolling - Classification of the OS-DS Force Difference in the Tail-Phase of Hot Strip Mill 2 at Tata Steel IJmuiden. Research Project, Industrial Engineering and Management.

Sikkema, Johan-Mark (2018) Removal of arsenic from drinking water by adsorption with amine modified polyketone. Research Project, Industrial Engineering and Management.

Spanier, Tamara (2018) The Stability of Networked Distributed Control Systems under Denial-of-Service Attacks. Research Project, Industrial Engineering and Management.

Stoffelsma, Nick (2018) An aramid based separator for lithium ion batteries. Research Project, Industrial Engineering and Management.

Streibel, Robert (2018) Managing the quality of LNG: exploring the option of using liquefied biogas as an additive. Research Project, Industrial Engineering and Management.

T

Tanis, Jochem (2018) Pickup and Delivery Problem with Cross-Docking and Transfers. Research Project, Industrial Engineering and Management.

Teunissen, Roos (2018) Regulation and hub network design for sustainable city logistics. Research Project, Industrial Engineering and Management.

Tjabbes, Pieter (2018) Predictive maintenance: the feasibility of a non‐straight edge knife sharpness deterioration model. Research Project, Industrial Engineering and Management.

V

Van Ruitenbeek, Maarten (2018) Multi-Level Control in an Electric Vehicle Smart Parking Lot. Research Project, Industrial Engineering and Management.

Van de Beek, Wouter (2018) Operator-Based Modeling of Single Loop and Butterfly Hysteresis Phenomena in Piezoelectric Actuators. Research Project, Industrial Engineering and Management.

Vellenga, Menno (2018) Control of porosity and shape deviation in selective laser melting. Research Project, Industrial Engineering and Management.

Vent, Melle de (2018) Distributed Optimal Control of Smart Electricity Grids: Home Battery and Electric Vehicle Implementation. Research Project, Industrial Engineering and Management.

Vente, Gijs de (2018) Effect of scan strategy and heat treatment on residual stresses and mechanical properties in selective laser melting of 316L stainless steel. Research Project, Industrial Engineering and Management.

Verwoerd, Richard (2018) Rotational Motion Transferring System for the Ocean Grazer Concept 3.0. Research Project, Industrial Engineering and Management.

van Dam, Freerk Johannes Hendrik (2018) Application of Array Signal Processing for Health Monitoring of Mechanical Tooling Systems. Research Project, Industrial Engineering and Management.

van Tilborgh, Koen (2018) Maximizing Profits for an Aggregator Providing Vehicle-to-Grid and Smart Charging Services in the Dutch Market. Research Project, Industrial Engineering and Management.

van der Horst, Myrdin (2018) Solar-Hydroelectric power plant modelling: An energy based approach. Research Project, Industrial Engineering and Management.

van der Vinne, Maarten (2018) Optimization of product allocation in a U-shaped distribution center. Research Project, Industrial Engineering and Management.

W

Wesselink, Thomas (2018) Non-linear saturated control without velocity measurements for planar, flexible-joint manipulators. Research Project, Industrial Engineering and Management.

Westra, Caroline (2018) Monitoring and control in multi-modality EMS networks. Research Project, Industrial Engineering and Management.

Witvoet, M. (2018) Decision making on ambulance diversion at the emergency department. Research Project, Industrial Engineering and Management.

Z

Zantingh, jeroen (2018) Energy dissipation models of the T-Peel, End-Notched-Flexure and Single-Leg-Bending fracture tests. Research Project, Industrial Engineering and Management.

Zuliani, Federico (2018) A Capacitated Joint Location-Inventory Model For Alternative Fuel Vehicles. Research Project, Industrial Engineering and Management.