Browse by Thesis type
Up a level |
Thesis
Adnan, Ariba (2020) High-pressure electrochemical cells for CO2 utilization. Bachelor's Thesis, Chemical Engineering.
Agarwal, Marisha (2020) Catalytic synthesis of a slow-release fragrance. Bachelor's Thesis, Chemical Engineering.
Ariffin, Ignatius Surya (2020) Prediction of formation ratio and melting point depression of choline chlorine, L-Proline, betaine, and dioctylamine based Deep Eutectic Solvents with different carboxylic acid donors. Bachelor's Thesis, Chemical Engineering.
Bertzouani, Danai (2020) Use of recycled rubber (GTR) in the production of tennis balls. Bachelor's Thesis, Chemical Engineering.
Bianchetti, Stefanie Martine (2020) The Production of Levulinic Acid: A Techno-economic Viability Analysis. Bachelor's Thesis, Chemical Engineering.
Bork, Matthias (2020) An overview of the influences on the properties of lignin-PLA composites for the purpose of food packaging. Bachelor's Thesis, Chemical Engineering.
Bouman, Tim (2020) Production of phosphoric acid from reclaimed phosphorus. Bachelor's Thesis, Chemical Engineering.
Brouwer, Jogchem Tim (2020) Optimum composition of ground tire rubber and polystyrene for thermal insulating rubber panels. Bachelor's Thesis, Chemical Engineering.
Buddingh, Dick (2020) Thermal insulation from PS/GTR blends. Bachelor's Thesis, Chemical Engineering.
Chandel, Anshu (2020) Polymer Bead as Catalyst Support for Glycerol Conversion Process. Bachelor's Thesis, Chemical Engineering.
Chander, Aindrilla (2020) Devulcanization of Rubber using Supercritical Carbon dioxide. Bachelor's Thesis, Chemical Engineering.
Deketh, Matteo (2020) Ammonia Decomposition over Ruthenium Catalysts. Bachelor's Thesis, Chemical Engineering.
Dikkers, Jordy (2020) Data Sciences Chemicals Providing digital solutions for researchers at the BASF Catalyst Research Center, Iselin, USA. Bachelor's Thesis, Chemical Engineering.
Donadon, Massimiliano (2020) Recycling of Post-Consumer Plastic for Packaging. Bachelor's Thesis, Chemical Engineering.
Goldhoorn, Reinier (2020) Commercial porous anion exchange resin beads for catalytic conversion of epoxides to cyclic carbonates by utilizing CO2 as reactant. Bachelor's Thesis, Chemical Engineering.
Graur, Valeria (2020) Catalytic synthesis of a slow-release fragrance. Bachelor's Thesis, Chemical Engineering.
Groen, M.J. (2020) Process design of polypyrrole. Bachelor's Thesis, Chemical Engineering.
Hanria, Yosua (2020) Optimization of the catalytic system, Fe-POP and co-catalyst, for the reaction between styrene oxide and CO2. Bachelor's Thesis, Chemical Engineering.
Herry, Alan (2020) Large Scale Lignin Organosolv Extraction. Bachelor's Thesis, Chemical Engineering.
Hobbenschot, Simon (2020) Identification of the optimal GBE and substrate combination to produce branched α-glucan polymers with a low glycemic index. Bachelor's Thesis, Chemical Engineering.
Khan, Yousaf (2020) Study on the evaluation of different degradation techniques towards green and sustainable valorisation of suberin. Bachelor's Thesis, Chemical Engineering.
Kim, HyeJi (2020) Systematic Study on Reaction Dynamics of Furan, Maleimide and Anthracene for responsive polymer applications. Bachelor's Thesis, Chemical Engineering.
Kim, Jiyea (2020) Use of Coagent to Prevent Polypropylene Degradation via β-scission During a Single Extrusion of Isotactic Polypropylene. Bachelor's Thesis, Chemical Engineering.
Kim, Soyeon, Ms (2020) Effect of functional parameters for effective lignin application in Polyurethane mechanical properties. Bachelor's Thesis, Chemical Engineering.
Langeland, Nienke (2020) ETS-4, molecular sieve in biogas upgrading. Bachelor's Thesis, Chemical Engineering.
Leemeijer, Samuël (2020) Functionalized polyolefins by melt processing: effect of Diels-Alder adduct. Bachelor's Thesis, Chemical Engineering.
Lian, Zhen Yang (2020) Dual Activity Enzyme Characterized from Metagenome Found in Beaver Droppings. Bachelor's Thesis, Chemical Engineering.
Lindblom, Robert Eric (2020) Garden tiles from waste car tires: production of garden tiles from the blend of waste rubbers and polyethylene. Bachelor's Thesis, Chemical Engineering.
Lloyd, Alex (2020) Effect of Supercritical CO2 Treatment on Catalyst Beads: Polymeric Beads as Heterogeneous Catalyst for CO2 Utilization. Bachelor's Thesis, Chemical Engineering.
Lopez Escribano, Celia (2020) Modelling Mass Transfer Phenomena and Reaction in Spherical Catalyst Pellets. Bachelor's Thesis, Chemical Engineering.
Luedtke, Filip (2020) Pressure drop analysis of gas-liquid two-phase flow through packed bed microreactors. Bachelor's Thesis, Chemical Engineering.
Maere d'Aertrycke, Fabrice, de (2020) Sustainable Polymers Synthesized by RAFT Polymerization. Bachelor's Thesis, Chemical Engineering.
Makarudze, Ivainesu (2020) Exploration of diene-dienophile pairs for Diels-Alder-based thermoreversible crosslinked polymers. Bachelor's Thesis, Chemical Engineering.
McWhir, NJ (2020) An Application of Ground Tire Rubber: Protective Gym Mat Flooring. Bachelor's Thesis, Chemical Engineering.
Meeuwes, Thom, T.R. (2020) Ionic liquid as a tool for cost-effective fractionation of biomass to obtain lignin with high β-O-4-content. Bachelor's Thesis, Chemical Engineering.
Meijer, Jelmer (2020) Cationic polyester emulsions for wood coating applications. Bachelor's Thesis, Chemical Engineering.
Meijer, Martijn (2020) Polycarbonate and recycled Rubber Blends. Bachelor's Thesis, Chemical Engineering.
Meindertsma, Michiel (2020) Reprocessability of self-healing polymer coatings based on Diels-Alder thermo-reversible chemistry. Bachelor's Thesis, Chemical Engineering.
Miedema, Daniël (2020) An investigation of the sustainability for the different synthesis routes available for the preparation of aliphatic primary amines and diamines from esters/carboxylic acids. Bachelor's Thesis, Chemical Engineering.
Paredes, Santiago Miguel (2020) Kinetic Modeling on the Liquid Acid Hydrolysis of Waste Cellulose to Glucose, 5-HMF and Levulinic Acid. Bachelor's Thesis, Chemical Engineering.
Park, Minsoo (2020) The use of glycogen branching enzymes on corn starch rheology and the relation to its structural characteristics and applications. Bachelor's Thesis, Chemical Engineering.
Raharjanto, Ariq (2020) Comparative Analysis of Bio-based Azelaic Acid Synthesis Methods and Techno-Economic Evaluation of Theoretical Process Design. Bachelor's Thesis, Chemical Engineering.
Randic, Marko (2020) Removal of Additives from PVC and PE with supercritical carbon dioxide. Bachelor's Thesis, Chemical Engineering.
Ravestein, Bas (2020) Investigation of using a Twin Screw Extruder for Rubber Recycling. Bachelor's Thesis, Chemical Engineering.
Sar, Bram van der (2020) The application of a novel green solvent on wheat straw. Bachelor's Thesis, Chemical Engineering.
Savino, Elia (2020) Styrene Oxidation Biphasic Reaction Monitoring Semi-Autonomous Spectral Separation. Bachelor's Thesis, Chemical Engineering.
Sibindi van Dam, N M (2020) Thermoplastic Elastomers from Recycled Car Tyres. Bachelor's Thesis, Chemical Engineering.
Sinha, Shashwat (2020) Novel coagent for functionalization of isotactic polypropylene with maleic anhydride under scCO2. Bachelor's Thesis, Chemical Engineering.
Sofijanic, M (2020) Chicken Manure for Biofuels and Biobased Chemicals. Bachelor's Thesis, Chemical Engineering.
Sol, Hendrik (2020) Comparing the catalytic activity of a bifunctional aluminium porphyrin POP with a monofunctional aluminium porphyrin POP using iodide as a nucleophile for the reaction of CO2 with propylene oxide to propylene carbonate in means of selectivity, conversion, yield, turnover number (TON) and turnover frequency (TOF). Bachelor's Thesis, Chemical Engineering.
Stoter, Ivan (2020) Application for recycled car tire. Bachelor's Thesis, Chemical Engineering.
Tapani, Eva (2020) Modeling of Amphiphilic Copolymers. Bachelor's Thesis, Chemical Engineering.
Tegudeer, Zhuorigebatu (2020) Determination of the techno-economic viability for the conversion of glycerol to BTX. Bachelor's Thesis, Chemical Engineering.
Tehenics, Adam (2020) Ammonia decomposition over ruthenium catalysts. Bachelor's Thesis, Chemical Engineering.
Top, Lotte (2020) From Recell® to Bio-Based Chemicals. Bachelor's Thesis, Chemical Engineering.
Van Gils, Elodie V. (2020) The Initial Branching Activity of Petrotoga mobilis and Butyrivibrio fibrisolvens Glucan Branching Enzymes on Starch. Bachelor's Thesis, Chemical Engineering.
Vasic, Stefan (2020) Techno-Economic analysis of large scale Lignin based Rigid Polyurethane and Epoxy Resin. Bachelor's Thesis, Chemical Engineering.
Venema, Nils (2020) New Biobased Solutions for Citrus Canker. Bachelor's Thesis, Chemical Engineering.
Vergara Vera, Noemy (2020) Oxidation systems for starch: Under what conditions can Hydrogen Peroxide replace sodium hypochlorite in starch oxidation? Bachelor's Thesis, Chemical Engineering.
Vicari, Laetitia (2020) Preparing long chain branching polypropylene foams from recycled polypropylene using dual purpose supercritical carbon dioxide. Bachelor's Thesis, Chemical Engineering.
Wirner, Luca (2020) Ammonia decomposition over heterogeneous catalysts. Bachelor's Thesis, Chemical Engineering.
Yew Jo Yee, Claris, Ms (2020) Thermoplastic elastomer (TPE) from inner tubes. Bachelor's Thesis, Chemical Engineering.
Zwanenburg, Vincent (2020) Improvements for Hydrogen Chloride Absorption. Bachelor's Thesis, Chemical Engineering.
van der Voort, Sterre H.E. (2020) Are Bio-Based Chemicals the New Gold Mines? - The Valorisation of the Phenolic Fraction of Pyrolysis Liquids to Bio-Based Chemicals. Bachelor's Thesis, Chemical Engineering.