Browse by Thesis type

A

Abeln, Thom (2019) Utilizing historical data in JIRA to reduce time spent on troubleshooting during the production process of the Datacon product family at Besi APac, Malaysia. Design Project, Industrial Engineering and Management.

Akkerman, Sanne (2019) In-line data analysis by a dynamical modeling approach. Design Project, Industrial Engineering and Management.

Albracht, Michiel (2019) Downtime Prediction with Machine Learning. Design Project, Industrial Engineering and Management.

Apel, Maximiliaan (2019) Multiple Asset Profit Optimization on the Dutch Secondary Reserve Market. Design Project, Industrial Engineering and Management.

B

Badings, Thom (2019) Data Validation and Reconciliation for the Assessment of Gas Transport Systems. Design Project, Industrial Engineering and Management.

Biel, Mark (2019) Design of a Thermal Spraying Booth for Airplane Engine Maintenance. Design Project, Industrial Engineering and Management.

Blokhuis, Marco (2019) Preventing production line set up problems by improving the production layout design process with 3D visualization and other tools. Design Project, Industrial Engineering and Management.

Bovenmars, Tijmen (2019) Optimizing Production Capacity of Royal Bel Leerdammer Cheese Manufacturing B.V. Design Project, Industrial Engineering and Management.

Buursma, Jasper (2019) Design of a self learning Anyfeeder system. Design Project, Industrial Engineering and Management.

C

Coenen, Max (2019) Accelerating the Dutch energy transition: Lowering operating temperatures of heat distribution systems in the built environment. Design Project, Industrial Engineering and Management.

Cornelissen, Emile (2019) Improving the product sales forecast of Hoogvliet to level capacity load at the new distribution center. Design Project, Industrial Engineering and Management.

D

de Graaf, Piter (2019) The analysis and improvement of the quality work process of piping for a turnaround project at Stork. Design Project, Industrial Engineering and Management.

de Vent, Melle (2019) Efficient Motion Planning Algorithm for Autonomous Vehicle Parking. Design Project, Industrial Engineering and Management.

de Vente, Gijs (2019) Topology optimized 3d printed horseshoe. Design Project, Industrial Engineering and Management.

E

Eleuch, Y. (2019) Optimization of maintenance trains’ starting location to minimize their occupancy time of the rail network. Design Project, Industrial Engineering and Management.

F

Faber, Jasper (2019) Conceptual design of a new CIP set. Design Project, Industrial Engineering and Management.

G

Glazener, Maurits (2019) ‘Redesign of the sewage works at the Jealott’s Hill International Research Centre’. Design Project, Industrial Engineering and Management.

H

Hemant Kumar, Athul Balaji (2019) Correlational study for low gloss optically transparent polyurethane coating surfaces. Design Project, Industrial Engineering and Management.

Herwig, Thijs (2019) Introducing a resource forecasting and data analysis tool to improve the maintenance shutdown preparation process at Tata Steel Ijmuiden. Design Project, Industrial Engineering and Management.

I

Immink, Thomas (2019) "Optimal design of the Spray-painting Department, including the implementation of an automatic line”. Design Project, Industrial Engineering and Management.

J

Jiang, Jia Shu (2019) Integeration of Machine Learning into Robotic Process Automation to improve client request processing capabilities within Ordina. Design Project, Industrial Engineering and Management.

K

Koning, Ton (2019) Balancing the Condor production line. Design Project, Industrial Engineering and Management.

Kortenbach, Thijn (2019) Feasibility study on a polyaluminum chloride plant at See Sen Chemical. Design Project, Industrial Engineering and Management.

Kuik, Laurah (2019) The Design of a Test Setup for the Verification of Acceleration Sensors. Design Project, Industrial Engineering and Management.

L

Lakerveld, Allard (2019) Optimizing the throughput time in the Surface Treatment department of Fokker Aerostructures B.V. Design Project, Industrial Engineering and Management.

Lubach, Bouke (2019) Design of a selection method to reduce the optimization time of industrial washing processes. Design Project, Industrial Engineering and Management.

Luppes, Koen (2019) The Belsimpel sorting machine. Design Project, Industrial Engineering and Management.

M

Moreno Trevino, Ivan (2019) The development of a Lean Six Sigma based framework for improving the field service operations of Philips healthcare equipment. Design Project, Industrial Engineering and Management.

N

Neuteboom, Peter (2019) Ultra-short pulsed laser opportunities. Design Project, Industrial Engineering and Management.

Nienhuis, Robbert (2019) Universal Blade Installation Tool. Design Project, Industrial Engineering and Management.

Nijman, Bart (2019) Reduction of the excess obligation and processing costs associated with purchase orders marked for cancellation at Besi APac. Design Project, Industrial Engineering and Management.

R

Renzelmann, Friederike (2019) Improving the maintenance planning at the TATA steel plant KGF 2. Design Project, Industrial Engineering and Management.

Reuvers, Koen (2019) Redesign of the presetting process at Fokker Aerostructures Hoogeveen. Design Project, Industrial Engineering and Management.

Ribeiro Queiros, Meikel (2019) Redesign of the pre-delivery quality inspection through a smart tool. Design Project, Industrial Engineering and Management.

S

Samallo, Vincent (2019) Modelling equine stride data for improved comparisons. Design Project, Industrial Engineering and Management.

Stokvis, C.F. (2019) Sustainability Calculation Tool. Design Project, Industrial Engineering and Management.

Stoter, Jarno (2019) Debottlenecking the standardization step in the production process at Nestlé Nunspeet. Design Project, Industrial Engineering and Management.

Swanborn, Quinten (2019) The Preliminary Design and Reliability Investigation of a Ground-Based Fixed-Tilt Utility-Scale Powerfoil Plant in a Desert Environment. Design Project, Industrial Engineering and Management.

T

Teeuwen, Elmar (2019) Improving the order throughput in the robotic warehousing system of HTG, a fixed time window batching approach. Design Project, Industrial Engineering and Management.

Tjabbes, p. a. (2019) The design of a profit focused non-linear resource allocation model for a honey production company. Design Project, Industrial Engineering and Management.

V

Vellenga, Menno (2019) Pre-development of a thermoplastic composite wing rib. Design Project, Industrial Engineering and Management.

Veneman, Thom (2019) Redesign of the personnel scheduling system to facilitate growth at Belsimpel. Design Project, Industrial Engineering and Management.

Verwoerd, Richard (2019) Creating a Standardised Process to reduceWaste Time at Akka Technologies. Design Project, Industrial Engineering and Management.

Visser, C. (2019) A Centralized Monitoring and Control System for Non-Emergency Patient Transportation by Vehicle. Design Project, Industrial Engineering and Management.

van Ouwendorp, Tomoyuki (2019) Knowledge storage in Boikon, a creative automation SME. Design Project, Industrial Engineering and Management.

van Tilborgh, Koen (2019) The Representative Cycle Analysis for Offshore Wind Farm Installation Projects to Obtain Historical Performance Data. Design Project, Industrial Engineering and Management.

van Wijck, Heleen (2019) ADAPTO XXL: A storage and retrieval system design to meet future capacity demand. Design Project, Industrial Engineering and Management.

van den Belt, Julia (2019) Developing a new strategy for tote allocation at an e-groceries fulfilment center. Design Project, Industrial Engineering and Management.

W

Westra, Caroline (2019) Optimizing the AutoStore order processing line at the e-commerce fulfillment centre at PostNL. Design Project, Industrial Engineering and Management.

Witvoet, Mark (2019) Redesign of the prioritization, sorting and dispatching of transfer orders in the warehouse of Besi APac. Design Project, Industrial Engineering and Management.

Z

Zaharia, Robert (2019) A System Dynamics Implementation at Tata Steel In The Age Of Digitalization. Design Project, Industrial Engineering and Management.

Zantingh, Jeroen (2019) Damage Assessment in Butt Joint Stringer Stiffened Skin Panels due to Quasi-Static Impact of a 3-inch Sphere. Design Project, Industrial Engineering and Management.

Ziel, Johan (2019) A data-driven framework which aims to identify the root-cause(s) of an unplanned process stop in a high-speed production line. Design Project, Industrial Engineering and Management.

Zuliani, Federico (2019) Redesign of the KPI Generation Process in the Transportation Department of Pirelli Tyre s.p.a. Design Project, Industrial Engineering and Management.