Browse by Thesis type

Thesis

Ahmed, Mohamed (2020) SWOT Analysis: Developing the key figure Overall Equipment Effectiveness (OEE). Integration Project, Industrial Engineering and Management.

Alberda, Lauren (2020) Performance of the subgradient-push algorithm. Integration Project, Industrial Engineering and Management.

Ansaldo, Gabriele, G. (2020) Information Design for Transportation. Integration Project, Industrial Engineering and Management.

Baitie, Rami (2020) Sustainable Roofs: An insight into the optimal utilization of the University of Groningen’s buildings. Integration Project, Industrial Engineering and Management.

Bakker, Sander, S (2020) Effect of draining efficiency on energy storage and revenues. Integration Project, Industrial Engineering and Management.

Barendsen, Jens (2020) The effects of time-scales on the evolution of cooperation on a Network-of-Networks. Integration Project, Industrial Engineering and Management.

Bashnfr, Zeina (2020) Autocratic Strategies in Social Dilemmas. Integration Project, Industrial Engineering and Management.

Beteré Marcos, Guillermo (2020) Technical and Economic Evaluation of the Hydrolysis of Tertiary Cellulose to Glucose Over Liquid Acid Catalyst. Integration Project, Industrial Engineering and Management.

Beuk, Shae (2020) Confidential. Integration Project, Industrial Engineering and Management.

Bijlsma, Jan Lyckle (2020) Distributed Formation Control in a Multi-agent Network. Integration Project, Industrial Engineering and Management.

Bloemhard, Channah (2020) Analysis of microstructure, damage and cracking performance of ZnAlMg coatings. Integration Project, Industrial Engineering and Management.

Boersma, Sietse (2020) Design of an embedded controller for a 5 DOF robotic manipulator. Integration Project, Industrial Engineering and Management.

Bootsma, Jelte (2020) Modeling and Control of an Integrated Heat and DC Microgrid System. Integration Project, Industrial Engineering and Management.

Brasser, Eva (2020) Heating Houses using Surface Water: A Sustainable Alternative to Natural Gas. Integration Project, Industrial Engineering and Management.

Breeuwsma, Jan Douwe (2020) Advanced Control of a Buck Converter for Application in DC Microgrids. Integration Project, Industrial Engineering and Management.

Bueno Eimbcke, Antonio (2020) Product requirements and options for Computer-aided diagnosis of movement disorders. Integration Project, Industrial Engineering and Management.

Cnossen, Boris, B.P. (2020) Coordinated Replenishment. Integration Project, Industrial Engineering and Management.

Dann Ruiz, Nicolas, N. (2020) Ocean Grazer: An analytical approach to design an umbilical cord & floater buoy system. Integration Project, Industrial Engineering and Management.

Dijken, Nick, van (2020) Seabed conditions and its relation to Suction Anchor Operation. Integration Project, Industrial Engineering and Management.

Dijkstra, Jorrit (2020) Heterogeneous delivery problem with multiple package deliveries per UAV deployment. Integration Project, Industrial Engineering and Management.

Djalins, Umar Abdurrauf (2020) Diftar vs Fixed-rate: An Assessment of Waste Management Proposals in Groningen. Integration Project, Industrial Engineering and Management.

Dullemen, Stijn, van (2020) A guide to large-scale solar thermal heat in the Netherlands. Integration Project, Industrial Engineering and Management.

El Kharbotly, Adnan, A.R. (2020) Confidential. Integration Project, Industrial Engineering and Management.

Franzen, Victor, V.P. (2020) Pretreatment for the Enzymatic Digestion of Recell Cellulose: a Chemcial and Economic Evaluation. Integration Project, Industrial Engineering and Management.

Frons, Bjarne (2020) Iterative bidding in electricity markets. Integration Project, Industrial Engineering and Management.

Gramsbergen, Maarten (2020) Progress, barriers and opportunities for waste-to-energy technologies at Omrin. Integration Project, Industrial Engineering and Management.

Haan, Vladimir, de (2020) Floating PV farms in a sea or an ocean. Integration Project, Industrial Engineering and Management.

Hamstra, A.J. (2020) Upsampling microorganism population size dataset by interpolation. Integration Project, Industrial Engineering and Management.

Heinsbroek, Ruben (2020) The diffusion of a solar powered vehicle in the Dutch automotive market. Integration Project, Industrial Engineering and Management.

Heringa, Louise (2020) The influence of microstructure on mechanical properties and cracking behaviour of ZnAlMg coating on steel substrate. Integration Project, Industrial Engineering and Management.

Hoekstra, Andel Anna-Rika (2020) Inventory optimization in assembling networks with uncertainties. Integration Project, Industrial Engineering and Management.

Hogeboom, M. (2020) Optimal Design of a Multi-Echelon Supply Chain. Integration Project, Industrial Engineering and Management.

IJpma, Willem, Johannes (2020) Design of an underwater altitude control system for the automated deployment of Ocean Battery. Integration Project, Industrial Engineering and Management.

Jansma, Roel (2020) Improving Recyclability: A Conceptual Design for Lotion Pump Dispensers. Integration Project, Industrial Engineering and Management.

Kalicharan, (Yessica) Rajshree Sandhiya Djoti (2020) Piezoresistive tactile sensor array of PDMS-graphene composite for sensing applications. Integration Project, Industrial Engineering and Management.

Kho, Ricky (2020) Hemp volarisation: the chemical upgrading of hemp fibre. Integration Project, Industrial Engineering and Management.

Kiertomäki, Satu (2020) Data-Driven Linear Quadratic Regulation of an Inverted Pendulum. Integration Project, Industrial Engineering and Management.

Klement, Thijs Hendrik Rik (2020) Sustainability of drinking cup usage at the University of Groningen. Integration Project, Industrial Engineering and Management.

Kok, Bastiaan, J (2020) Applying a Catalyst Layer to a GDE by Utilising an Automated Spray-Coater. Integration Project, Industrial Engineering and Management.

Koops, Pieter Jelke (2020) Effects of privacy preservation on performance of average consensus algorithms. Integration Project, Industrial Engineering and Management.

Langeveld, Emma (2020) Clustering of dynamical systems using Generalized Principal Component Analysis. Integration Project, Industrial Engineering and Management.

Lensen, Gerben (2020) Informational Nudging of Electric Vehicle Owners. Integration Project, Industrial Engineering and Management.

Lindeboom, Bas (2020) Design of a Hybrid Optimisation Simulation modelto minimise the CO2 emissions of the Multi-Depot Vehicle Routing Problem with Heterogeneous Fleetwithout jeopardising delivery throughput. Integration Project, Industrial Engineering and Management.

Maghnouji, A. (2020) Comparing exploration strategies for deep reinforcement learning-based navigation in dynamic maze environments. Integration Project, Industrial Engineering and Management.

Margry, Sebastian (2020) Biokerosene: progress and prospects. Integration Project, Industrial Engineering and Management.

May, F.J.M. (2020) Improving the Adhesion and Corrosion Performance of ZnMg-Zn Bi-layered Coatings through “High Temperature Fast Annealing” Strategy. Integration Project, Industrial Engineering and Management.

Meide, van der, Jonah (2020) Three-dimensional porous metal/Li composite anodes for stable lithium-metal batteries. Integration Project, Industrial Engineering and Management.

Meile, Nils (2020) Analysing the Global Convergence Capabilities of a Bearing-Based Formation Control Law using ROS. Integration Project, Industrial Engineering and Management.

Mukhamedov, Abdulkhamid (2020) Assessing and Improving the Current Energy Management at the UG Library. Integration Project, Industrial Engineering and Management.

Neerken, Tjarko (2020) An Energy-Based Approach to Satellite Attitude Control. Integration Project, Industrial Engineering and Management.

Ochoa, Leopoldo (2020) Truthful vs Non-Truthful Players: Research on networked market structures with application in the Electricity Market. Integration Project, Industrial Engineering and Management.

Papousek, Tijs (2020) Hydraulic power connection for Ocean Grazer. Integration Project, Industrial Engineering and Management.

Peretto, Marco (2020) Gait Monitoring Sensors - Nanomaterial composite-based sensors business case-study/analysis. Integration Project, Industrial Engineering and Management.

Perik, B.G.J. (2020) Solvability Conditions for DC Power Grids. Integration Project, Industrial Engineering and Management.

Porte, Anne (2020) A document management system for capacity allocation at ProRail. Integration Project, Industrial Engineering and Management.

Prasetyo, Muhammad, MA (2020) Using Reinforcement Learning to Design a State Feedback Controller. Integration Project, Industrial Engineering and Management.

Prasetyo, Muhammad, MA (2020) Using Reinforcement Learning to Design a State Feedback Controller. Integration Project, Industrial Engineering and Management.

Ridder, Geeske (2020) The effect of Mg concentration on the microstructure, mechanical properties and corrosion resistance of physical vapor deposited ZnMg coatings. Integration Project, Industrial Engineering and Management.

Romkema, Daan (2020) Distributed optimization using logistic regression for a classification problem. Integration Project, Industrial Engineering and Management.

Sahni, Eveline (2020) Capacity setting in Dutch Make-to-Order food processing companies. Integration Project, Industrial Engineering and Management.

Scheltinga, Maik (2020) Optimal design of the hydrogen fuel network. Integration Project, Industrial Engineering and Management.

Sijtsma, Jorrit, Mr (2020) Stability assessment of a floating hybrid wind-wave platform: a frequency signal analysis. Integration Project, Industrial Engineering and Management.

Sissing, Marleen (2020) Evaluation of the COE Calculation Tool for the Ocean Grazer 3.0. Integration Project, Industrial Engineering and Management.

Slosser, Gijs (2020) Design and FEA of a Mini Heater for the Thin Film Synthesis Process. Integration Project, Industrial Engineering and Management.

Smit, Rick, H.P. (2020) Digital Twin Development for Resato. Integration Project, Industrial Engineering and Management.

Soede, Quinty Louise (2020) Bend the Butt. Integration Project, Industrial Engineering and Management.

Steeman, Dominiek, D. M. (2020) Analyzing Several Business Applications for a Micro Flow Sensor. Integration Project, Industrial Engineering and Management.

Suresh, Shashank (2020) Sugar & citrate fermentation ability and prediction of pH of fermentation in plant-based cheese. Integration Project, Industrial Engineering and Management.

Tongeren, David, van (2020) Analytical Calculations on the Nine-ChamberedSuction Anchor. Integration Project, Industrial Engineering and Management.

Uijt de boogaardt, Lars Adriaan (2020) A Validation and Performance Analysis of a Distributed Control Scheme for DC Microgrids. Integration Project, Industrial Engineering and Management.

Vasbinder, Willem (2020) Application of nanofiltration in a nasal filter. Integration Project, Industrial Engineering and Management.

Vaseiko, Bohdan (2020) WEC Optimization via Machine Learning. Integration Project, Industrial Engineering and Management.

Veldboom, Niek (2020) Design of a robotic arm pose measurement system. Integration Project, Industrial Engineering and Management.

Voorde, S. ten (2020) Evaluating 5-hydroxymethylfurfural as a biobased platform chemical using a techno-economic process design. Integration Project, Industrial Engineering and Management.

Voort, Suzanne, van de (2020) The industrial-scale synthesis of PEF from bio-based FDCA and ethylene glycol. Integration Project, Industrial Engineering and Management.

Voorwald, Daniël, Leon (2020) Feasibility study on quantifyingprocess parameters of a drop forge,using IMU sensor. Integration Project, Industrial Engineering and Management.

Wammes, Puck (2020) Catalytic Lactic Acid Production from Biomass. Integration Project, Industrial Engineering and Management.

Wiersma, Lars (2020) Perspective on the Bulk Production of Dibasic Magnesium Hypochlorite at Nedmag. Integration Project, Industrial Engineering and Management.

Yakali, Baris (2020) Decision Making in Complex Networks. Integration Project, Industrial Engineering and Management.

Yska, Stijn, Keimpe (2020) Biofouling in bioreactors; the selection of biofilm detection techniques. Integration Project, Industrial Engineering and Management.

Zwaag, J.T. van der (2020) Production of dibasic magnesium hypochlorite for industrial application. Integration Project, Industrial Engineering and Management.

de Ruiter, Erwin (2020) Identification of additional functions and services for POLAR. Integration Project, Industrial Engineering and Management.

matar, m. ziad (2020) Promoting Biodiversity in Photovoltaic Solar Fields: a financial overview through systems thinking. Integration Project, Industrial Engineering and Management.

stolte, noah (2020) A NEW 3D PRINTING FILAMENT FROM RECLAIMED TIRES AND POLYPROPYLENE. Integration Project, Industrial Engineering and Management.

van Dis, Martijn, MG (2020) The performance of Reinforcement Learning with application for Adaptive Traffic Signal Controllers. Integration Project, Industrial Engineering and Management.

van Doornik, Stefanie (2020) Feasibility Study of a Data-Based Emergency Controller for a Truck Platoon System. Integration Project, Industrial Engineering and Management.

van Esch, Jurjan (2020) Reclamation of Butyl Rubber: A Blend with High-Density Polyethylene for Fused Deposition Modeling Filaments. Integration Project, Industrial Engineering and Management.

van Kessel, Thimo (2020) Simulation of the energy flow of an offshore energy storage system. Integration Project, Industrial Engineering and Management.

van Lingen, W.M. (Wiebren) (2020) Oxidized porous metals for stable and high-capacity rechargeable Li metal batteries. Integration Project, Industrial Engineering and Management.

van Marwijk Kooij, Gillis (2020) Comparison of Solvability Conditions for Direct Current Power Grids. Integration Project, Industrial Engineering and Management.

van Oosterom, Bart (2020) Logistic operating Curves in Production Planning. Integration Project, Industrial Engineering and Management.

van de Hesseweg, Marlies (2020) 3D Morphometric Study of Harbor and Gray Seal Whiskers. Integration Project, Industrial Engineering and Management.

van de Loo, Koen (2020) Laboratory experiments on the technical feasibility of the Ocean Battery suction foundation in sand. Integration Project, Industrial Engineering and Management.

van den Hoven, Marcelle, M. J. (2020) Gaining qualitative insight on evolutionary dynamics of multi-agent learning on a network. Integration Project, Industrial Engineering and Management.

van den Oort, Thomas (2020) Article Identification by Laser Scanning. Integration Project, Industrial Engineering and Management.

van der Bijl, Marjanne (2020) 3D printing materials for bioreactor systems. Integration Project, Industrial Engineering and Management.

van der Plas, J.D.C. (2020) Seal Whiskers - Simulated behavior of seal whiskers in the different flows. Integration Project, Industrial Engineering and Management.

van der Veen, J (2020) Laser metal deposition as a fabrication method for high-entropy alloy parts. Integration Project, Industrial Engineering and Management.

van der Wal, Joost (2020) Improving the internal logistics at Coatinc Groningen. Integration Project, Industrial Engineering and Management.

van der Wurf, Joost (2020) Economic network structure and cooperation. Integration Project, Industrial Engineering and Management.