Javascript must be enabled for the correct page display

Browse by Thesis type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: A | B | D | E | F | H | J | K | N | O | P | R | S | T | V | W | Z
Number of items: 40.

A

Akpaloo, Angelique Shika (2021) Smart Quality Control Laboratory at Plixxent B. V. Master's Internship Report, Chemical Engineering.

Alvarenga, Giuliana (2021) Analysis of Incoming Co-polymer Raw Material and its influence on Process Parameters. Master's Internship Report, Chemical Engineering.

B

Badr, Parniya (2021) Recycling of post-consumer rigid Poly(vinyl) chloride by dissolution and precipitation. Master's Internship Report, Chemical Engineering.

Beltman, Tessa (2021) The potential for renewable hydrogen as feedstock in the chemical industry. Master's Internship Report, Chemical Engineering.

Benita, Benedicta Bella (2021) Functional Properties of Biopolymers as Sustainable Cheese Coating Alternative – A Comparative Study. Master's Internship Report, Chemical Engineering.

Bosch, GP (2021) Recycled polymers as modifiers for bitumen. Master's Internship Report, Chemical Engineering.

D

Dieker, Christopher (2021) The future of multilayer packaging films. Master's Internship Report, Chemical Engineering.

Dijkstra, Emiel (2021) Heat recovery in combination with high temperature heat pump. Master's Internship Report, Chemical Engineering.

Donk, Frank, van der (2021) Methanol production from biomass using the Torrgas gasification technology. Master's Internship Report, Chemical Engineering.

Drenth, Hinno (2021) Loss Registration: Analysis and Automation. Master's Internship Report, Chemical Engineering.

de Leeuw, Tijn (2021) Glycosyl Hydrolase Technology Push In silico Screening of Substrate, Product, Market and Consumer. Master's Internship Report, Chemical Engineering.

E

El-Rez, Ibrahim (2021) Development of an Energy Dashboard for BASF Nederland B.V. Heerenveen. Master's Internship Report, Chemical Engineering.

F

Filippi, Francesco (2021) Functionalization of Polyolefins by Copolymerization of Monomers Containing Latent Reactive Groups Available for Later Modification. Master's Internship Report, Chemical Engineering.

H

Heijkoop, Nicolaas Jesse (2021) Automated Extraction of Information from Piping and Instrumentation Diagrams. Master's Internship Report, Chemical Engineering.

Horvat, Diana (2021) Optimization of the forming time during paper sheet filtration processes. Master's Internship Report, Chemical Engineering.

J

Jardan, Daniela (2021) Investigation of the electrochemical conversion of bio-oil compounds. Master's Internship Report, Chemical Engineering.

Jong, Bart, B.C.A.de (2021) Development of a downstream process. Master's Internship Report, Chemical Engineering.

Jonge, Fabian, de (2021) Evaluation of Multivariate Statistical Process Control and Quality control of the K-208 Batch Process. Master's Internship Report, Chemical Engineering.

Jonker, Matthijs (2021) Increasing the precision and predictive ability of the energy management model used for the PA-6 plant of DSM Emmen. Master's Internship Report, Chemical Engineering.

K

Koot, Olivia (2021) Sustainability of flexible packaging, Research into the shelf life of flexible packaging and water soluble adhesive for improved paper recycling. Master's Internship Report, Chemical Engineering.

Korte, Joren de (2021) Qualification of open- source alternative to Aspen Plus. Master's Internship Report, Chemical Engineering.

Krasnikova, Antonina (2021) The effect of laser drilling and gamma vs. x-ray irradiation on single use systems. Master's Internship Report, Chemical Engineering.

Krisman, B.G.A. (2021) Minimization of the Aldehyde Emission. Master's Internship Report, Chemical Engineering.

N

Noutchogouin Kenge, M.J. (2021) Mooney viscosity analysis from the reclamation of ground tyre rubber using sebs. Master's Internship Report, Chemical Engineering.

O

Okkinga, O.W.J. (2021) Zeolyst C.V. Effluent Recovery Analysis and Optimization. Master's Internship Report, Chemical Engineering.

P

Post, Cornelis (2021) A Literature Study on the Development of an Effective Underwater Seaweed Adhesive. Master's Internship Report, Chemical Engineering.

R

Ramakrishnan, Abinavnataraj (2021) Photochemical water splitting – Systematic study of W, Mo dopants on BIVO4. Master's Internship Report, Chemical Engineering.

Reede, Jorrit (2021) Evaluation of potato pre-treatment unit operations and cell disruption and S L separation equipment for optimizing production of native potato protein. Master's Internship Report, Chemical Engineering.

Roo, Cornelis Maurits de (2021) Modelling and calibration of reaction components in the PISA pilot plant. Master's Internship Report, Chemical Engineering.

Rusu, Igor (2021) Wet pressing. Master's Internship Report, Chemical Engineering.

S

Sachelaru, Andreea (2021) Investigation of the key-parameters in the production of Plantics bio-foams. Master's Internship Report, Chemical Engineering.

Selenica, Sara (2021) Bio-Based Alternative for Bitumen. Master's Internship Report, Chemical Engineering.

Stojkov, Gorjan (2021) Techno-economic study for the desalination of derivative wastewater effluent. Master's Internship Report, Chemical Engineering.

T

Takens, Tanja (2021) Investigation of the potential for reduction of the required amount of hydrogen peroxide in the oxidation process of organic carbon in the sulfuric acid work-up at Teijin Aramid Emmen. Master's Internship Report, Chemical Engineering.

V

Vries, Ernst, E.P.C.de (2021) Sweco Internship Report. Master's Internship Report, Chemical Engineering.

W

Wansink, Pim, P.H.J. (2021) Control strategy for the gas phase hydrogenation section. Master's Internship Report, Chemical Engineering.

Wempe, Sari Famke (2021) Design of an AspenPlus simulation of a PET polymerization plant, cost analysis comparison of different methods and heat exchanger network optimalization by pinch analysis. Master's Internship Report, Chemical Engineering.

Wijk, Sylvian van (2021) Quantifying and reducing the amount of cloggages in the Nouryon SMCA factory. Master's Internship Report, Chemical Engineering.

Z

Zafarjon, N. (2021) Desulfurization of gases using the Vitrisol process: Testing and Tools of the Process. Master's Internship Report, Chemical Engineering.

Zutphen, Thomas van (2021) Investigation into the use of an Electro-Reactor for Carbon Dioxide to Oxalic Acid conversion. Master's Internship Report, Chemical Engineering.

This list was generated on Tue Feb 7 00:08:11 2023 CET.