Browse by Degree programme

A

Ambekar, Prajwalkumar (2022) Flexible end of arm tool (EOAT) for the automation of lacquering part (un)loading at Philips Drachten. Design Project, Industrial Engineering and Management.

B

Beuk, Shae (2022) An Organizational and Operational Structure based on Industrial Energy Savings Opportunities for Dewatering Practices. Design Project, Industrial Engineering and Management.

Bloembergen, Paul (2022) Using an Optimization Model in combination with Discrete Event Simulation to improve Product Handling at Wijnne Barends B.V. Design Project, Industrial Engineering and Management.

Buiten, Sophie van (2022) Designing an energy analytics prototype analyzing potential relationships between process variables/parameters and energy consumption using a case study. Design Project, Industrial Engineering and Management.

Burink, Rauke (2022) Optimisation of Driving Bridge Design. Design Project, Industrial Engineering and Management.

D

Degenaar, Joris (2022) Capitalizing on sustainability: an environmental impact assessment on the sustainability of fit-to-size packaging. Design Project, Industrial Engineering and Management.

Dijkhuis, Brian, B.W. (2022) An Optimization Study On The Formulation Of A Long-Lasting Hand Sanitizer Using The Grand Product Design Model. Design Project, Industrial Engineering and Management.

Dijkstra, Ids (2022) Green hydrogen from offshore wind power hubs in the North-Sea. Design Project, Industrial Engineering and Management.

F

Fouz, Moumen (2022) Construction of a Verified and Validated Discrete Event Simulation Model Based on a Case Study of a Tire Manufacturing Company. Design Project, Industrial Engineering and Management.

Franke, N. G. H. (2022) Modelling and simulations of a novel process design for the minimisation of ammonia emissions. Design Project, Industrial Engineering and Management.

Frons, Bjarne (2022) Improving the relocation decision-making process in the warehouse of Bolk - A Hybrid Systems Modelling approach. Design Project, Industrial Engineering and Management.

H

Hartmans, Hessel K.J. (2022) Optimization of aerodynamic bicycle wheel design using CFD analysis. Design Project, Industrial Engineering and Management.

Hartog, Thomas, den (2022) Redesign of the wax application system for paper straw manufacturing at Tembo Paper. Design Project, Industrial Engineering and Management.

Heins, Jorn-Ids (2022) Site redevelopment utilizing an automated parametric design tool. Design Project, Industrial Engineering and Management.

Huijbers, Twan (2022) Redesigning an Autonomous Guided Vehicle assembly process to increase the production rate using Hybrid modelling. Design Project, Industrial Engineering and Management.

Huijsman, Diederik (2022) Pass-line control design of hot-dip galvanizing lines during strip transition at Tata Steel IJmuiden. Design Project, Industrial Engineering and Management.

Huisman, Iwan (2022) Redesign of a picking algorithm at the warehouse of Belsimpel. Design Project, Industrial Engineering and Management.

J

Jonker, Nathan (2022) Ambient temperature modeling in Stedin’s compact stations using electrical- thermal resistance modeling extending the residual lifetime assessment. Design Project, Industrial Engineering and Management.

L

Leenders, Nienke (2022) Alternative monomer selection for the amorphous block in the L-lactide/ε-caprolactone block copolymer. Design Project, Industrial Engineering and Management.

M

Melo, Nico de (2022) Between Zero-Risk and Zero-Impact: Survival Analysis Model for the B-relay of ProRail. Design Project, Industrial Engineering and Management.

Merkelijn, Nadalina (2022) Preparing an industrial scale-up under high uncertainty: simulation as a tool for explorative analysis. Design Project, Industrial Engineering and Management.

Molen, Anita van der (2022) Design a new way to measure the pressure at the pump head of the SPH1299 pump. Design Project, Industrial Engineering and Management.

Muthuram, Vigneshraj (2022) Simulation Driven Thermal Drift Investigation of a MEMS flow sensor for application in IV infusion systems. Design Project, Industrial Engineering and Management.

P

Patil, Vaibhav (2022) Optimization of the product development process by integrating the generative design approach. Design Project, Industrial Engineering and Management.

Perik, Bas (2022) Data-driven Streamlining of Salt Replenishment Flows Using Hybrid Modelling at Bolk Business Improvement Inc. Design Project, Industrial Engineering and Management.

Pillai, Ronak (2022) To optimally source capacity gaps of Kraft Heinz’s products within the internal factory network, using a simulation-based model employing hierarchical planning approach. Design Project, Industrial Engineering and Management.

Q

Quartel, Beaudine (2022) Upscaling of a novel method to preserve cut flowers with supercritical carbon dioxide. Design Project, Industrial Engineering and Management.

R

Ravipati, Sreekar (2022) Design of a new outsourcing model for Sparck Technologies B.V. Design Project, Industrial Engineering and Management.

Rekveld, Calvin (2022) Visual Classification of Oyster Mushroom Hats Using Deep Learning. Design Project, Industrial Engineering and Management.

Romano, Joshua (2022) Recycling rubber into sustainable products: An LCA approach to analysing total CO2 footprint and guiding future business growth. Design Project, Industrial Engineering and Management.

S

Sanjay Jain, Siddhant (2022) A case study of the application of flexible capacity allocation for a skip-loader production facility by creating a digital twin. Design Project, Industrial Engineering and Management.

Schuttrups, Jasper (2022) Developen a zero-emission heating strategy for the district heating network of WarmteStad. Design Project, Industrial Engineering and Management.

Sorkale, Christian Yitzchak (2022) Design for Assembly tool for complex hydrogen production modules. A case study at Resato, Assen. Design Project, Industrial Engineering and Management.

Stolte, Noah (2022) Redesigning the fat treatment process. Design Project, Industrial Engineering and Management.

Swaving Dijkstra, Peter (2022) Simulation-based production planning improvement of the Philips Drachten Mother & Childcare department to increase throughput. Design Project, Industrial Engineering and Management.

T

Tippannavar, Rohini Prakash (2022) Design and implementation of simulation based flexible model for production system. Design Project, Industrial Engineering and Management.

V

Vink, Hidde, H.R. (2022) Design of a scheduling method for cost reduction of a paint shop in the automotive supply industry. Design Project, Industrial Engineering and Management.

W

Werff, Melvin van der (2022) Door adjustment system by means of sensors. Design Project, Industrial Engineering and Management.

Woldring, Lex (2022) Towards an optimal Modular Product Architecture for the CVP-Everest at Sparck Technologies. Design Project, Industrial Engineering and Management.

Z

Zonjee, Ruben (2022) Air cooled heat exchangers: A great opportunity & core problem for refinery transitions. Design Project, Industrial Engineering and Management.

Zwaag, Jan Teunis van der (2022) A techno economic analysis on the converter tapping system of Tata Steel. Design Project, Industrial Engineering and Management.