Browse by Degree programme
![]() | Up a level |
Alewijnse, Bartje (2018) Carbon reduction and compensation for employee flight travel at the University of Groningen. Integration Project, Industrial Engineering and Management.
Andela, Paul (2018) Template-Free Synthesis of Nanoporous Ni as Binder-Free Current Collector for Li-ion Batteries. Integration Project, Industrial Engineering and Management.
Annema, Jasper (2018) Sustainable city logistics. Integration Project, Industrial Engineering and Management.
Attema, Ilse (2018) Fast simulation of integrated circuits by balanced truncation. Integration Project, Industrial Engineering and Management.
Bak, Jasmijn (2018) Order Picking Efficiency at Koga. Integration Project, Industrial Engineering and Management.
Bastiaanse, Cas (2018) Vortex-Induced Vibration Reduction by Seal WHisker Geometry. Integration Project, Industrial Engineering and Management.
Beuving, Jaromir (2018) Enzymatic Glucose Production From Fine Sieve Material Recovered From Domestic Waste Water. Integration Project, Industrial Engineering and Management.
Bloembergen, Floris (2018) Delamination behaviour study of ZnMg coatings by microscratch test. Integration Project, Industrial Engineering and Management.
Bloembergen, Paul (2018) Detecting cyber attacks on Heating, Ventilation and Air-Conditioning systems. Integration Project, Industrial Engineering and Management.
Boersma, Bauke (2018) Efficiency improvement pre-assembly Bosch E-bikes. Integration Project, Industrial Engineering and Management.
Bouwman, Irene (2018) Refinery of reed using carbon dioxide or formic acid to extract xylose, lignin and cellulose. Integration Project, Industrial Engineering and Management.
Bruni Sousa, Matheus (2018) Simultaneous Localization and Collaborative Mapping using Nexus Mobile Robots. Integration Project, Industrial Engineering and Management.
Burgers, Freek (2018) Reclamation of Ground Tire Rubber: composition with virgin EPDM rubber. Integration Project, Industrial Engineering and Management.
Bustamante Cisneros, Ricardo Ernesto (2018) Entrainment for neural activities in the brain. Integration Project, Industrial Engineering and Management.
Christofi, Stefanos (2018) Nanoporous Graphene-like Carbon for Electrochemical Energy Storage. Integration Project, Industrial Engineering and Management.
Dijkhuis, Brian (2018) Cellulose as a renewable feedstock for the chemical industry. Integration Project, Industrial Engineering and Management.
Dijkstra, Ids (2018) Miniaturized anaerobic digesters as screening tool for biogas production from lignocellulosic waste streams. Integration Project, Industrial Engineering and Management.
Duursema, Edwin (2018) Recycled waste tyre rubber as modifier for bitumen. Integration Project, Industrial Engineering and Management.
Eekert, Simone van (2018) Industrial process for the conversion of bread waste into a substrate for the red micro alga Galdieria sulphuraria in the production of Nanoglycogen. Integration Project, Industrial Engineering and Management.
Elsen, Tom (2018) Wind energy, Sustainable development, and the 2020 Goals in Groningen. Integration Project, Industrial Engineering and Management.
Elsen, Tom (2018) Wind energy, Sustainable development, and the 2020 Goals in Groningen. Integration Project, Industrial Engineering and Management.
Elsen, Tom (2018) “Wind energy, Sustainable development, and the 2020 Goals in Groningen”. Integration Project, Industrial Engineering and Management.
Elsen, Tom (2018) “Wind energy, Sustainable development, and the 2020 Goals in Groningen”. Integration Project, Industrial Engineering and Management.
Feitsma, Hijlke (2018) Porous graphene enhanced electrochemical performances for high energy-density batteries. Integration Project, Industrial Engineering and Management.
Folkertsma, Rens (2018) Mathematical modeling of slamming in a single-piston pump inside the Ocean Grazer. Integration Project, Industrial Engineering and Management.
Franke, Nout (2018) A Techno-Economic Evaluation on the Production of HMF from Sucrose. Integration Project, Industrial Engineering and Management.
Gawel, Job (2018) Efficient Distribution Network Design for Healthcare Equipment Through Implementation of the Physical Internet. Integration Project, Industrial Engineering and Management.
Goddard, Daniel (2018) Improving Warehouse Design and Operations at De Marktslager. Integration Project, Industrial Engineering and Management.
Haakman, Kyra (2018) Competitive games in power networks. Integration Project, Industrial Engineering and Management.
Heikens, Wilco (2018) The enzymatic extraction of ferulic acid from wheat bran. Integration Project, Industrial Engineering and Management.
Hendriksen, Maud (2018) Optimizing breathability and protection of a collarbone protector. Integration Project, Industrial Engineering and Management.
Hoogerbrugge, Coen (2018) Investigating the effect of varying the distribution of damping coefficients inside a floater blanket on the power extraction for a novel wave energy converter. Integration Project, Industrial Engineering and Management.
Houtsma, Gerben (2018) Designing a Decision Support System for Container Stowage Planning on Barge Ships. Integration Project, Industrial Engineering and Management.
Huisman, Mirte (2018) Noise-Robust, Self-Triggered Coordination of Second-Order Systems over Noisy Channels. Integration Project, Industrial Engineering and Management.
Huls, Gerrit (2018) The application of the Lower Dimensional Model to the phenomenon of Brain Synchronization. Integration Project, Industrial Engineering and Management.
Huseynov, Ibrahim (2018) Growth and Decay in Networks. Integration Project, Industrial Engineering and Management.
Hut, Lennard (2018) Investigating the dynamic behaviour of a multi-piston pump. Integration Project, Industrial Engineering and Management.
Jaarsma, Iris (2018) Concentration of Wastewater Streams for Increased Biogas Production. Integration Project, Industrial Engineering and Management.
Jaspers, Barend (2018) Recycling inner tubes into bicycle crates. Integration Project, Industrial Engineering and Management.
Jonker, Jacob (2018) On the scaling effects of a single-piston pump. Integration Project, Industrial Engineering and Management.
Kasteel, Sanne van (2018) Machine communication at Resato. Integration Project, Industrial Engineering and Management.
Kingma, Niek (2018) Combining electric vehicles with electricity markets. Integration Project, Industrial Engineering and Management.
Knevelbaard, Vester (2018) Canals versus Roads - Performance difference measured, based on key performance indicators, for transportation form a hub to the city centre of Groningen. Integration Project, Industrial Engineering and Management.
Kuiper, Paulien (2018) Resilient Consensus in Presence of Trusted Nodes in the Network. Integration Project, Industrial Engineering and Management.
Kuipers, Richard (2018) Control of networks: How much energy is needed? Integration Project, Industrial Engineering and Management.
Lebbink, Felix (2018) Recycling car tires. Integration Project, Industrial Engineering and Management.
Loer, Gerwin Matthijs (2018) Modelling and Analysis of the pumping system of the Ocean Grazer under realistic wave motion. Integration Project, Industrial Engineering and Management.
Lolkema, Fleur (2018) Data-driven analysis on the inland container transport. Integration Project, Industrial Engineering and Management.
Lugten, Joost (2018) Power grids and their graph structure. Integration Project, Industrial Engineering and Management.
Meijburg, Oscar (2018) Designing Product Families for Production Planning. Integration Project, Industrial Engineering and Management.
Meijer, Henny (2018) Decision Support for Synchromodal Inland Container Transport. Integration Project, Industrial Engineering and Management.
Moreno, Ivan (2018) Using Condition Monitoring Information for Spare Part Management at Service Operation Vessels in Offshore Wind Farm Maintenance. Integration Project, Industrial Engineering and Management.
Mulder, Dinand (2018) Identifying and Eliminating Waste in BuyBay’s Warehouse Operations. Integration Project, Industrial Engineering and Management.
Neeleman, Jesper (2018) Cross-dock Modelling and Design. Integration Project, Industrial Engineering and Management.
Niemeijer, Rudy (2018) Scanning path for rapid mapping of a compound eye with GRACE. Integration Project, Industrial Engineering and Management.
Offringa, Ruben (2018) Removing Heavy Metals From Industrial Wastewater. Integration Project, Industrial Engineering and Management.
Ordelman, Douwe (2018) Design for the conversion of hot meal food waste into Nanoglycogen. Integration Project, Industrial Engineering and Management.
Paapst, Kevin (2018) Analysing the experimental results of a single-piston pump. Integration Project, Industrial Engineering and Management.
Perez Chaher, Mariano (2018) Autonomous Re-Configuration of Multi-Agent Formation In the Presence of a New Agent. Integration Project, Industrial Engineering and Management.
Pot, Hans (2018) Using Narrowband Internet of Things for PI-Containers. Integration Project, Industrial Engineering and Management.
Remmerswaal, Evan (2018) Stabilization under Denial-of-Service with the use of sensor coding. Integration Project, Industrial Engineering and Management.
Rijnja, Sander (2018) Control of a water treatment plant. Integration Project, Industrial Engineering and Management.
Rodrigues do Amaral, Francisco Xavier (2018) Correlational Analysis between Next-Generation Sequencing Data and Process Dynamics in a Wastewater Treatment Plant. Integration Project, Industrial Engineering and Management.
Roesdyoko, Erlangga Hario (2018) Isolation of Chitin-modifying Enzymes. Integration Project, Industrial Engineering and Management.
SMITH, Pieter Jimmy (2018) Evaluating the influence of positive and negative framing on algorithm use among forecasters with different risk propensity. Integration Project, Industrial Engineering and Management.
Simons, Wouter (2018) Managing smaller batch sizes. Integration Project, Industrial Engineering and Management.
Six Dijkstra, Arjan (2018) GRACE Graphical user interface. Integration Project, Industrial Engineering and Management.
Slump, Willem (2018) Current Control of a DC to DC Buck Converter. Integration Project, Industrial Engineering and Management.
Sprenkels, Koen (2018) Plastic recycling and valorisation via dedicated pyrolysis approaches. Integration Project, Industrial Engineering and Management.
Stefan, Andrei Cristian (2018) Formation control of mobile robotic manipulators. Integration Project, Industrial Engineering and Management.
Sterk, Roos (2018) Optimizing the damping coefficient for a WEC array. Integration Project, Industrial Engineering and Management.
Swaving Dijkstra, Peter (2018) Assessing the potential for energy efficiency of a typical household in the Netherlands. Integration Project, Industrial Engineering and Management.
Telkamp, Gerard (2018) Investigating the morphology andchemical composition of silver dopedcalcium phosphate coatings. Integration Project, Industrial Engineering and Management.
Ten Broeke, Annebel (2018) Advice on methods to reduce and compensate Co2 emission of RUG staff commuting and RUG flight travel under 700 kilometres. Integration Project, Industrial Engineering and Management.
Thalen, Jorn (2018) Bioaugmentation: an option for enhanced cow manure digestion? Integration Project, Industrial Engineering and Management.
Timmer, Xander (2018) Designing a fixture for intravenous pumps. Integration Project, Industrial Engineering and Management.
Van den Elzen, Sietse (2018) The Ocean Grazer: Designing a flexible underwater reservoir. Integration Project, Industrial Engineering and Management.
Van der Veen, Gijs (2018) Polymeric Surfactants for Industrial Applications. Integration Project, Industrial Engineering and Management.
Veldboer, Jeffrey (2018) Analyzing prima-dual algorithms that solve an optimization problem in the field of data center cooling. Integration Project, Industrial Engineering and Management.
Verkerk, Jens (2018) Design of a Novel Water Softener Technology. Integration Project, Industrial Engineering and Management.
Vonk, Marijn Rokus Pieter (2018) Data Infrastructure Improvement at FrieslandCampina Samrong. Integration Project, Industrial Engineering and Management.
Waijer, Jaap (2018) Integrating a Maritime Carbon Capture & Storage System. Integration Project, Industrial Engineering and Management.
Weerdenburg, Dennis (2018) GTR and BR based bicycle crates. Integration Project, Industrial Engineering and Management.
Weiden, Olivier van der (2018) Scrap tire recycling by using polymers. Integration Project, Industrial Engineering and Management.
Wentink, Benjamin (2018) Manage the complexity of electric networks. Integration Project, Industrial Engineering and Management.
Wentink, Benjamin (2018) Manage the complexity of electric networks. Integration Project, Industrial Engineering and Management.
Wienbelt, Jeroen Peter (2018) Minimizing shape deviation in internal 3d-printed channels. Integration Project, Industrial Engineering and Management.
Wieringa, Bas (2018) Investigating the chemical, antibacterial and cytotoxicity properties of Ag-HA coatings on titanium by electrochemical deposition. Integration Project, Industrial Engineering and Management.
Woldring, Lex (2018) Design of a robust decentralized control scheme for frequency regulation in power networks. Integration Project, Industrial Engineering and Management.
de Haas, Antonie (2018) Expanding the scope of thermoreversible rubbers using Diels-Alder chemistry. Integration Project, Industrial Engineering and Management.
de Meer, Nick (2018) Equilibria in a Supply Function Bidding game. Integration Project, Industrial Engineering and Management.
de Münnik, Wessel (2018) Effect of processing parameters and post-heat treatment on the strength, corrosion and wear-resistance of 17-4 PH stainless steel samples built using selective laser melting. Integration Project, Industrial Engineering and Management.
de Weerd, Simon (2018) Fractionated recovery of lignin pyrolysis products. Integration Project, Industrial Engineering and Management.
le Blanc, Olivier (2018) Investigation of mechanical properties of ZnMg coatings with the use of nanoindentation method. Integration Project, Industrial Engineering and Management.
ten Broeke, Jelle (2018) Improving the Design and Operations of a Manufacturing System. Integration Project, Industrial Engineering and Management.
van Berkel, Erik (2018) Implementation of a vision-based formation controller. Integration Project, Industrial Engineering and Management.
van Buiten, Sophie (2018) The fight against photo fraud. Integration Project, Industrial Engineering and Management.
van Egmond, Olaf (2018) 1,2-Propanediol from glycerol. Integration Project, Industrial Engineering and Management.
van Emous, Enrico Vincent (2018) Expected Lifetime Extension for Circulation Pumps with Optimized Condition-based Maintenance and Design Modifications. Integration Project, Industrial Engineering and Management.
van Oostendorp, Jeroen (2018) Subspace identification in data centers. Integration Project, Industrial Engineering and Management.
van Oosterhout, Rosalie (2018) Inverted Pendulum Demonstrator. Integration Project, Industrial Engineering and Management.
van den Broek, Marco (2018) Design of the Biomimetic Stereocilia Sensor. Integration Project, Industrial Engineering and Management.
van der Heide, Ruurd (2018) The production of epichlorohydrin from glycerol. Integration Project, Industrial Engineering and Management.
van der Veen, Jochem (2018) Stabilization and Trajectory Tracking of a Segway. Integration Project, Industrial Engineering and Management.
van der Werff, Melvin (2018) Attack detection on a power grid. Integration Project, Industrial Engineering and Management.